INTRODUCTION: A MASTERPIECE OF NATURE
Iranian Travertine is where geological wonder meets architectural ambition. Formed over millennia in mineral-rich springs, each slab is a unique canvas of nature’s artistry, offering unparalleled beauty fused with exceptional durability for residential, commercial, and monumental projects.
Unique Proposition: Every slab carries the fingerprint of nature – no two pieces are exactly alike
TECHNICAL PROFILE & CERTIFICATIONS
Core Specifications
Geological Name: Travertine Limestone
Origin: Premium quarries of Iran (Azerbaijan, Isfahan, Yazd)
Formation: Sedimentary rock from mineral spring deposits
Geological Age: Miocene to Pleistocene epoch
International Certifications
ISO 9001:2015 Quality Management System
EN 12057 European Natural Stone Standard
ASTM C615 American Standard Specification
Independent Laboratory Test Verified
COLOR SPECTRUM & CLASSIFICATION
Premium Collection
| Code | Commercial Name | Dominant Color | Special Characteristics |
|---|---|---|---|
| A-01 | Crystal White | Pure White | Highest purity, low absorption (0.8-1.2%) |
| A-02 | Classic Gold | Golden Cream | Natural luminosity, golden veining |
| A-03 | Noble Vein | Beige-Honey | Parallel linear patterns, visual depth |
| A-04 | Modern Silver | Gray-Silver | Cool tone, harmonizes with steel/glass |
| A-05 | Royal Red | Red-Brown | Rare premium grade, 1.5% absorption rate |
| A-06 | Noagati | Multicolor | Natural blend of multiple hues |
SECTION 3: ENGINEERING SPECIFICATIONS
Mechanical Properties Table
| Parameter | Value Range | Test Method | Standard Compliance |
|---|---|---|---|
| Compressive Strength | 85-110 MPa | ASTM C170 | ≥ 60 MPa |
| Flexural Strength | 9-16 MPa | EN 12372 | ≥ 7 MPa |
| Abrasion Resistance | 22-28 mm | ASTM C241 | ≤ 30 mm |
| Water Absorption | 0.5-2.2% | ASTM C97 | ≤ 3% |
| Bulk Density | 2500-2700 kg/m³ | ASTM C97 | – |
| Porosity | 4-12% | In-house Lab | – |
Environmental Resistance
Freeze-Thaw Resistance: Excellent (45 test cycles)
Chemical Resistance: Good (against alkaline solutions)
Color Stability: Excellent (UV test 2000+ hours)
Thermal Stability: Up to 400°C
SECTION 4: ADVANCED SURFACE FINISHES
Surface Finishes
Premium Polished
90-95 gloss units
Enhanced color depth
Scratch-resistant surface
Super Honed Matte
Perfect surface uniformity
Ideal for healthcare/educational facilities
High slip resistance
Antique Brushed
Natural aged appearance
Excellent coverage
Suitable for hotel/restaurant themes
Industrial Sandblasted
Uniform 1-3mm depth
Complete safety in wet areas
Luxury Leathered
Soft tactile feel
Natural visual appearance
Fingerprint resistant
Edge Profiles
Straight Edge
Pencil Round
Waterfall Edge
Double Bevel
ENGINEERED APPLICATIONS
Interior Solutions
Application | Recommended Finish | Suggested Thickness | Technical Notes
----------------------|-------------------|---------------------|----------------
Shopping Mall Flooring | Honed | 20-30mm | High abrasion resistance
Hotel Lobby Walls | Polished | 20-25mm | Indirect lighting compatible
Kitchen Countertop | Leathered | 30mm | Nano-sealer required
Residential Staircase | Brushed | 30-40mm | Anti-slip nosing recommendedExterior Solutions
Ventilated Facades: Dry installation with air cavity
Landscape Paving: 1-2% slope for drainage
Pool Coping: Sandblasted finish + anti-algae treatment
Decorative Facades: Integration with LED lighting
SECTION 6: INSTALLATION STANDARDS
Substrate Preparation
Surface level tolerance: Maximum 3mm deviation over 2m
Tensile strength: Minimum 1.5 MPa
Moisture content: Maximum 2%
Installation Materials
Polymer stone adhesive (tension ≥ 2.5 MPa)
Epoxy or polyurethane grout
Nano-technology sealer (5-7 year durability)
Installation Methods
Traditional System: Cement mortar bedding
Semi-Dry System: Powder adhesive application
Dry System: Mechanical clip installation
MAINTENANCE PROGRAM
Daily Maintenance
Cleaning: pH-neutral solutions only
Protection: Furniture protection pads
Prevention: Entryway grit barriers
Periodic Maintenance Schedule
Frequency | Activity | Recommended Products
------------|-----------------------------|---------------------
Monthly | Deep Cleaning | Specialty stone cleaner
6-Monthly | Surface Inspection | Moisture meter testing
Annually | Re-sealing | Nano-sealant application
Biennially | Light Polishing | Crystalline polish
Quinquennially | Complete Restoration | Professional restoration serviceSECTION 8: LIFE CYCLE COST ANALYSIS
Comparative Economic Analysis (per m²)
| Item | Travertine | Granite | Ceramic | Engineered Wood |
|---|---|---|---|---|
| Initial Cost | $250 | $350 | $150 | $200 |
| Installation | $120 | $150 | $80 | $100 |
| Annual Maintenance | $15 | $10 | $20 | $50 |
| Service Life (years) | 30+ | 40+ | 15 | 20 |
| Salvage Value | 30% | 40% | 0% | 10% |
| 30-Year Cost | $580 | $690 | $650 | $1,200 |
CASE STUDIES
International Project: Burj Al Arab, Dubai
Product: Classic Gold Travertine
Quantity: 8,500 m²
Challenge: High salinity environment
Solution: Special marine-grade sealer
Results: Exceptional performance after 8 years
Healthcare Project: Tehran Specialty Hospital
Product: Crystal White Travertine
Quantity: 6,200 m²
Requirement: Anti-bacterial properties
Solution: Silver-ion nano-sealer
Results: 60% reduction in microbial contamination
Tagline:
Iranian Travertine – Beauty for Generations
Ideal For:
Architects & Designers
Contractors & Installers
Project Managers
Large-Scale Purchasers
Building Material Consultants